Dinion Day/Night Camera LTC0465 en Installation and Operation manual
Dinion Day/Night Camera Table of Contents | en 3 Table of Contents 1 Safety 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Important notices 7 1.4 FCC & ICES compliance 1.5 UL certification 10 1.6 Bosch notices 11 8 2 Introduction 12 2.1 Features 12 2.2 Unpacking 12 3 Connections 13 3.1 Power connection 13 3.1.1 Low voltage cameras 13 3.1.2 High voltage cameras 14 3.2 Video connection 14 3.2.1 Output Video signal 14 3.
en | Table of Contents Dinion Day/Night Camera 4.3.4 VMD submenu (remotely via Bilinx only) 25 4.4 Install menu structure 27 4.4.1 Lens Wizard submenu 27 4.4.2 Alarm submenu 29 4.4.3 Defaults submenu 30 5 Technical Data 31 5.1 Specifications 31 Glossary 33 F.01U.163.823 | v1.0 | 2010.
Dinion Day/Night Camera Safety | en 1 Safety 1.1 Safety precautions 5 DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation.
en | Safety 1.2 Dinion Day/Night Camera Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Generally, using a dry cloth for cleaning is sufficient but a moist, fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners. 2.
Dinion Day/Night Camera 1.3 Safety | en 7 Important notices Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products.
en | Safety 1.4 Dinion Day/Night Camera FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Dinion Day/Night Camera Safety | en 9 Informations FCC et ICES (modèles utilisés aux États-Unis et au Canada uniquement) Suite à différents tests, cet appareil s'est révélé conforme aux exigences imposées aux appareils numériques de classe B, en vertu de la section 15 du règlement de la Commission fédérale des communications des États-Unis (FCC), et en vertu de la norme ICES-003 d'Industrie Canada.
en | Safety Dinion Day/Night Camera Printing Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4. 1.5 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044.
Dinion Day/Night Camera 1.6 Safety | en 11 Bosch notices Copyright This manual is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. Note: This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing.
en | Introduction Dinion Day/Night Camera 2 Introduction 2.1 Features The Dinion Day/Night is a professional surveillance day/night camera that incorporates 10-bit digital signal processing. The Dinion Day/Night camera is easy to install and ready to use, and offers good quality picture performance. Features include: 2.
Dinion Day/Night Camera 3 Connections | en 13 Connections CAUTION! Before proceeding, disconnect the power from the power supply cable. Ensure that the voltage of the unit matches the voltage and type of the power supply being used. 3.1 Power connection 3.1.1 Low voltage cameras VIDEO 12 VDC 24 VAC ALARM 10 mm Figure 3.
en | Connections 3.1.2 Dinion Day/Night Camera High voltage cameras VIDEO ALARM Figure 3.2 High voltage power connection Connect the power cable of a high voltage camera to either a 230 VAC or a 120 VAC power supply outlet depending on the version. 3.2 Video connection VIDEO Video BNC ALARM Figure 3.3 3.2.1 BNC connectors Output Video signal The camera has a BNC connector to connect the video coax cable with a male BNC connector. F.01U.163.823 | v1.0 | 2010.
Dinion Day/Night Camera 3.3 Connections | en 15 Alarm and relay connector ALARM 5 mm (0.2 in) 1 4 Figure 3.4 Alarm and relay connector pins Pin Alarm socket 1 Alarm in ground 2 Alarm in 3 Relay out contact 1 4 Relay out contact 2 – Max. wire diameter AWG 22-28 for both stranded and – Default relay position normally open (n.o.); no alarm. – Alarm output relay switching capability: Max voltage 30VAC solid; cut back 5 mm (0.2 in) of insulation. or +40 VDC. Max 0.5 A continuous, 10 VA.
en | Connections 3.4 Dinion Day/Night Camera Lens mounting The camera accepts CS-mount lenses. C-mount lenses can be mounted using a lens adapter ring. DC-iris lenses are recommended for the best picture performance. The camera automatically detects the type of lens used and optimizes performance accordingly. A spare male lens connector is provided.
Dinion Day/Night Camera 3.5 Connections | en 17 Back focus adjustment To optimize picture sharpness in both bright and low-level lighting, adjust the back focus. Use the camera's unique Lens Wizard. This ensures that the object of interest always remains in focus, even when focusing at the maximum lens iris opening (for example, at night). – When back focusing varifocal lenses, adjust to obtain a sharp picture in both wide-angle and tele positions for both far and near focus.
en | Connections Dinion Day/Night Camera Bosch 5. Lock the back focus locking button. Bosch 6. Press and hold the center key for more than 1 second until all the menus disappear. 7. Close the side door panel. Note: To backfucus a zoom lens, see the zoom lens installation guide. F.01U.163.823 | v1.0 | 2010.
Dinion Day/Night Camera 3.6 Connections | en 19 Mounting the camera The camera can be mounted either from the top or from the bottom (1/4" 20 UNC thread). The bottom mounting is isolated from ground to prevent ground loops. Figure 3.7 Mounting a camera CAUTION! Do not point the camera/lens into direct sunlight as this may damage the sensors. 3.7 Day/Night switching The camera is equipped with a motorized IR filter.
en | Configuration 4 Dinion Day/Night Camera Configuration The camera normally provides an optimal picture without the need for further adjustments. However, advanced set-up options are available in a menu system for getting the best results under special circumstances. The camera implements your changes immediately so that before and after settings are easily compared. 4.1 Menus 4.1.1 Top level menus There are two upper level menus: a Main menu and an Install menu.
Dinion Day/Night Camera Configuration | en 21 Up key Menu/Select key (center) Right key Figure 4.3 Navigation Down key Left key – Use the up or down keys to scroll through a menu. – Use the left or right keys to move through options or to set – When in a menu, quickly double-press the menu/select key parameters. to restore the selected item to its factory default. – To close all menus at once hold down the menu/select key until the menu display disappears or continually select the Exit item.
en | Configuration 4.3 Dinion Day/Night Camera Main menu structure Item Selection Level -15 to +15 Description Video level control: A positive value is more useful for low-light conditions; a negative value is more useful for very bright conditions.
Dinion Day/Night Camera 4.3.1 Configuration | en 23 Shutter/AGC submenu Item Selection Description Shutter AES, FL, AES (auto-shutter) - the camera Fixed automatically sets the optimum shutter speed. FL - flickerless mode avoids interference from light sources (recommended for video-iris or DC-iris lenses only). FIXED - forces a fixed shutter speed. Gain On, Off On - the camera automatically sets the gain to the lowest possible value needed to maintain a good picture. Off - sets AGC off.
en | Configuration 4.3.2 Dinion Day/Night Camera Day/Night submenu Item Selection Description Day/Night Auto, Color, Auto - the camera switches the IR cut- Monochrome off filter on and off depending on the scene illumination level. Monochrome - the IR cut-off filter is removed, giving full IR sensitivity. Color - the camera always produces a color signal regardless of light levels.
Dinion Day/Night Camera 4.3.3 Configuration | en 25 Color submenu Item Selection Description White balance ATW, ATW - Auto tracking white balance AWBhold allows the camera to constantly adjust for optimal color reproduction. AWBhold - Puts the ATW on hold and saves the color settings. Red gain -5 to +5 Adjusts the Red gain to optimize the white point. Blue gain -5 to +5 Adjusts the B gain to optimize the white point. EXIT 4.3.4 Returns to main menu.
en | Configuration Item Dinion Day/Night Camera Selection Description VMD Sets the sensitivity for motion to the sensitivity desired level. The longer the white bar, the more motion is required to acitvate the VMD alarm. Motion above this level activates alarm. OSD alarm Alphanumeric Text for on-screen display alarm (16 text characters maximum). EXIT Returns to main menu.
Dinion Day/Night Camera 4.4 Configuration | en 27 Install menu structure Item Lens type Selection Description Auto, Auto: - the camera automatically Manual, DC- selects the type of lens. iris, Video Manual, DC-iris, Video modes: select the matching lens type to force the camera to the correct lens mode. Lens Wizard Submenu Select to optimize the camera-lens combination backfocus point. Comm On, Off Communications enabled or disabled. If Off, Bilinx communication is disabled.
en | Configuration Item Dinion Day/Night Camera Selection Set LVL Description Only for video-iris lenses. Adjust the level control on the lens to center the level detector indicator (see below). EXIT Returns to Install menu. Adjustment procedure DC-iris Lens 1. Unlock the back focus locking button. 2. Access the Lens Wizard menu. 3. Set Back Focus Now is highlighted in the menu. 4. Turn the back focus adjustment as required. 5. Lock the back focus locking button. 6. Exit the menu.
Dinion Day/Night Camera 4.4.2 Configuration | en 29 Alarm submenu Item Selection Description Alarm In - None, high, Select none to disable the alarm input. Active low Select active-high or active-low for the alarm input connector. Alarm In - None, Selects the action of the camera when Action Mono the alarm input is active. Alarm out - VMD, VMD: - output relay activates on VMD Action Remote, alarms.
en | Configuration 4.4.3 Dinion Day/Night Camera Defaults submenu Item Selection Description Restore All No, Yes Restores all settings to their default (factory) values. Select YES, then press the Menu/Select button to restore all values. When completed the message RESTORED! is shown. EXIT F.01U.163.823 | v1.0 | 2010.01 Returns to Install menu.
Dinion Day/Night Camera Technical Data | en 5 Technical Data 5.1 Specifications 31 Type number LTC0465/11 LTC0465/21 LTC0465/51 LTC0465/61 Standard PAL NTSC PAL NTSC Active pixels 752 x 582 768 x 494 752 x 582 768 x 494 Rated supply +12 VDC +12 VDC 230 VAC 120 VAC voltage 24 VAC 24 VAC 50 Hz 60 Hz (50 Hz) (60 Hz) Minimum <0.26 lux illumination <0.
en | Technical Data Power Dinion Day/Night Camera <4 W consumption Dimensions 58 x 66 x 122 mm (2.28 x 2.60 x 4.80 in) without lens (H x W L) Weight 450 g (0.99 lb) without lens Tripod mount Two 1/4" 20 UNC - isolated (bottom) and non-isolated (top) Operating -20 °C to +55 °C (-4 °F to +131 °F) temperature Controls OSD with softkey operation F.01U.163.823 | v1.0 | 2010.
Dinion Day/Night Camera Glossary | en 33 Glossary A AES Automatic Electronic Shutter (see Electronic iris). Aperture The size of the opening in the lens iris that controls the amount of light reaching the CCD Sensor. The larger the F-number, the less light reaches the sensor. An increase of one F-stop, halves the amount of light reaching the sensor. Auto Level Control (ALC) The adjustment of the video level to give the desired brightness level.
en | Glossary Dinion Day/Night Camera contrast differences when only a portion of the image is brightly lit (e.g. a person in a sunlit doorway). See also Smart BLC. Backfocus The distance between the image plane and the rear portion of the lens. Correct backfocus adjustment ensures that the camera remains in focus under various conditions. Bilinx A communications protocol that allows remote control, configuration, and updates to be performed over the video cable (Coax or Passive UTP).
Dinion Day/Night Camera Glossary | en 35 further enhanced by integrating a number of fields to improve the signal-to-noise ratio of the camera (this may introduce motion blur). Default Shutter A feature allowing the shutter speed to be set to a fast speed to eliminate motion blur and provide a detailed and clear image of fast-moving objects while there is sufficient light.
en | Glossary Dinion Day/Night Camera Focal Length The distance from the optical center of the lens to the image of an object located at an infinite distance from the lens. Long focal lengths give a small field of view (e.g. telephoto effect), while short focal lengths give a wide angle view. I Infrared Illumination Electromagnetic radiation (light) with a longer wavelength than is visible to the human eye. IR illumination is prominent at dusk and dawn and in incandescent lamps.
Dinion Day/Night Camera Glossary | en 37 P Privacy Masking The ability to mask out a specific area to prevent it from being viewed in order to comply with privacy laws and particular site requirements. PWIE Peak White Inverse Engine: White highlights are automatically turned black to reduce bright spots. Useful in traffic and car park applications. R Region of Interest A specific area within a field of view, used by the motion detection algorithm to identify motion.
en | Glossary Dinion Day/Night Camera Smart BLC (Back Light Compensation) Smart back-light compensation allows the camera to automatically compensate for bright areas of a high contrast scene without having to define a window or area. U UTP (Unshielded Twisted Pair) A variant of twisted pair cabling, UTP cable is not surrounded by any shielding. The wires in a twisted pair cable are twisted around each other to minimize interference from the other twisted pairs in the cable.
Bosch Security Systems www.BoschSecurity.
