Installation Manual

"A"
1234123412341234
"B" "C "
"D"
16 LTC 8921
Video Input
Modules
are Required
for Camera
Inputs
1 to 256
16 LTC 8921
Video Input
Modules
are Required
for Camera
Inputs
257 to 512
16 LTC 8921
Video Input
Modules
are Required
for Camera
Inputs513 to 768
16 LTC 8921
Video Input
Modules
are Required
for Camera
Inputs
769 to 1024
16 LTC 8921
Video Input
Modules
are Required
for Camera
Inputs
1025 to 1280
16 LTC 8921
Video Input
Modules
are Required
for Camera
Inputs
1281 to 1536
16 LTC 8921
Video Input
Modules
are Required
for Camera
Inputs
1537 to 1792
8 LTC 8934 Video Output Modules
are Required for Monitors 1 to 64.
Set all Termination Switches to
ON for all Modules.
“Secondary” Level LTC 8903 Bay
(for Camera Range 1 to 1024)
8 LTC 8921 Video Input
Modules (in Slots 1, 4, 5,
8, 9, 12, 13, and 16)
are Required for 64
Monitor Systems
Set LTC 8921 Module Termination
Switches in ODD Numbered Slots
to OFF (all Primary LTC 8902 Bays)
Set LTC 8921 Module
Termination Switches in
EVEN Numbered Slots to
ON (all Primary LTC 8903 Bays)
Set all Termination
Switches on the LTC 8921
Modules in “Secondary”
LTC 8921 Bay to ON
Front View – Module Placement and Termination Settings
“Primary” LTC 8903 Bay
Cameras 1–256
“Primary” LTC 8903 Bay
Cameras 257–512
“Primary” LTC 8903 Bay
Cameras 513–768
“Primary” LTC 8903 Bay
Cameras 769–1024
LTC 8903 Bay
Cameras 1025–1280
LTC 8903 Bay
Cameras 1281–1536
LTC 8903 Bay
Cameras 1537–1792
“Primary” LTC 8903 Bay
Cameras 1–256
“Primary” LTC 8903 Bay
Cameras 257–512
“Primary” LTC 8903 Bay
Cameras 513–768
“Primary” LTC 8903 Bay
Cameras 769–1024
LTC 8903 Bay
Cameras 1025–1280
LTC 8903 Bay
Cameras 1281–1536
LTC 8903 Bay
Cameras 1537–1792
LTC 8902
Lower
LTC 8809
Ribbon
Cable
Upper
LTC 8809
Ribbon
Cable
All Group Inputs
are used up
LTC 8902
Monitor Bay
Containing
Modules for
64 Monitor
Outputs
Lower
LTC 8809
Ribbon
Cable
Upper
LTC 8809
Ribbon
Cable
To Video
In “A”
To
Video
In “B”
Each Line
Represents an
LTC 8809
Ribbon
Cable
“Secondary” LTC 8903 Camera Bay
Containing 8 LTC 8921 Video
Input Modules
Each Line
Represents an
LTC 8809
Ribbon Cable
8 LTC 8808 Panels are Required
for Camera Inputs 1 to 256
Rear View – LTC 8809 Interconnect Cable Routing
Monitors
33– 64
Monitors
1–32
“D4”
“D”
“C”
“B”
“A”
“D”
“C”
“B”
“A”
“D”
“C”
“B”
“A”
“D”
“C”
“B”
“A”
“D”
“C”
“B”
“A”
“D”
“C”
“B”
“A”
“D”
“C”
“B”
“A”
“D”
“C” “B”
“A”
“C4”
“B4”
“A4”
“D3”
“C3”
“B3”
“A3”
“D2”
“C2”
“B2”
“A2”
“D1”
“C1”
“B1”
“A1”
Figure 8.34: Module, Termination, and Interconnect Cabling for 1792 Camera by 64 Monitor System
90 en | Satellite System Configuration Installations LTC 8900 Series
2016.04 | 10.7 | F.01U.323.096 Installation Manual Bosch Security Systems, Inc.