Datasheet

RG-11/U 2000 ft (600 m) 4000 ft (1200 m)
Cat 5/UTP
(Passive receiver)
750 ft (225 m) 1500 ft (450 m)
User Connections
Power, Camera 21-30 VAC, 50/60 Hz
Power, Heater 21-30 VAC, 50/60 Hz
Control Data Biphase ±
RS-232 RX/TX or RS-485 ± - optional
control data (dip switch selectable)
Video BNC/UTP
Audio Line In 9 K Ohm typ, 5.5 Vp-p max
EOLR Alarm Inputs (2) Programmable for
“normally open”, “normally closed”,
“normally open-supervised”, “normally
closed-supervised”
Alarm Inputs (5) Programmable for
“normally open” or “normally closed”
Relay Out (1) Dry contact output rating:
2 A @ 30 VAC
Open Collector Outputs
(3)
32 VDC@150 ma max.
Environmental
In-Ceiling Indoor Pendant Outdoor Pendant
Design
Rating
IP54,
4
Plenum rated
IP66
5
IP66
5
Operatin
g Temp.
–10°C to 40°C
(14°F to
104°F)
–10°C to 40°C
(14°F to
104°F)
–40°C to 50°C
(–40°F to 122°F)
with XT kit:
–60°C to 50°C
(–76°F to 122°F)
Storage
Temp.
–40°C to 60°C
(–40°F to
140°F)
–40°C to 60°C
(–40°F to
140°F)
–40°C to 60°C
(–40°F to 140°F)
Humidity 0% to 90%
relative, non-
condensing
0% to 90%
relative, non-
condensing
0% to 100%
relative,
condensing
4. With optional VGA-IP54K-IC kit.
5. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble. Meets requirements for NEMA 4X,
except impact test, with use of an acrylic bubble.
Construction
Dimensions See dimensional drawings
Weight
• In-ceiling 2.66 kg (5.86 lb)
• Indoor Pendant 2.88 kg (6.3 lb)
• Outdoor
Pendant
3.32 kg (7.3 lb)
Bubble Size 153.1 mm diameter (6.03 in.)
Construction Material
• Housing Cast aluminum
• Bubble Pendant: Acrylic (high-resolution)
In-ceiling: Polycarbonate (rugged)
Color White (RAL 9003)
Standard Finish Powder coated, sand finish
Mounts/Accessories
Bubbles
In-ceiling
Clear rugged polycarbonate VGA-BUBBLE-CCLR
Tinted rugged polycarbonate VGA-BUBBLE-CTIR
Pendant
Clear rugged polycarbonate VGA-BUBBLE-PCLR
Tinted rugged polycarbonate VGA-BUBBLE-PTIR
Clear high-resolution acrylic VGA-BUBBLE-PCLA
Tinted high-resolution acrylic VGA-BUBBLE-PTIA
Pendant Arm Mounts
Wall Arm (No Transformer) VG4-A-PA0
Wall Arm (120/230 VAC Transformer) VG4-A-PA1 /
VG4-A-PA2
Pendant Arm with Wiring VGA-PEND-ARM
Mounting plate for VGA-PEND-ARM VGA-PEND-WPLATE
Trim skirt for AutoDome Series Power
Supplies
VG4-A-TSKIRT
Optional Mounting Plates for Arm Mounts
Corner Mounting Plate VG4-A-9542
Mast (Pole) Mounting Plate VG4-A-9541
Pendant Pipe Mounts
Pipe Mount Cap VG4-A-9543
Pendant Roof Mounts
Roof (Parapet) Mount
(VG4-A-9543 Pipe Mount Cap required. Available separately.)
VGA-ROOF-MOUNT
Optional Mounting Plates for Roof Mounts
Flat Roof Adapter for Parapet Mount LTC 9230/01
In-ceiling Support Kits
Bracket for suspended or drop ceilings VGA-IC-SP
Gasket kit for IP54 certification VGA-IP54K-IC
6 | AutoDome 600 Series Analog PTZ Camera