Operating instructions

² While the programme is running, the programme

duration may be extended or reduced for the follow-

ing reasons.

Reductions in time occur because of:

– small loads,

– reduced heating times, e.g. if the water is very hot,

– reduced washing temperature after the programme

has started,

– the laundry for drying with low residual moisture.

Increases in time occur because of:

– additional rinse cycle if excessive foam is in the

laundry,

– multiple spinning if the laundry is distributed poorly

in the drum,

– increased heating times, e.g. when the water is too

cold,

– water pressure too low,

– selection of an additional option, e.g. Extra Rinse

O and/or Intensive È after the programme has

started,

– very absorbent washing extends the heating dura-

tion,

– the laundry for drying is wet.

Finish in time You can select the finish in time, see page 32.

Drying duration or automatic

drying

You can set the drying duration or automatic drying by

touching the Dry Š

button, see page 28. When the

washing and drying without a break was selected, time

drying or auto drying duration will add in programme

duration automatically. Related programmes will pro-

long 5-15 minutes for good washing performance.

Downloaded From WashingMachine-Manual.com Manuals