Installation Instruction
Table Of Contents
- Double oven
- en
- Table of contents
- 1 Safety
- 2 Preventing material damage
- 3 Environmental protection and saving energy
- 4 Familiarising yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic operation
- 8 Time-setting options
- 9 Childproof lock
- 10 Rapid heating
- 11 Cleaning and servicing
- 12 Cleaning assistance
- 13 Shelf supports
- 14 Appliance door
- 14.1 Detaching the lower appliance door
- 14.2 Attaching the lower appliance door
- 14.3 Removing the door panes from the lower the appliance door
- 14.4 Installing the door panes for the lower the appliance door
- 14.5 Detaching the upper appliance door
- 14.6 Attaching the upper appliance door
- 14.7 Removing the door panes from the upper the appliance door
- 14.8 Installing the door panes for the upper the appliance door
- 15 Troubleshooting
- 16 Disposal
- 17 Customer Service
- 18 How it works
- 19 Installation instructions
Appliance door en
21
8.
Lift out the intermediate pane and set it down care-
fully on a flat surface .
9.
WARNING‒Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶ Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
10.
Clean the appliance door.
→"Suitable cleaning agents", Page13
11.
Dry the door panes and refit them.
→"Installing the door panes for the upper the appli-
ance door ", Page21
14.8 Installing the door panes for the upper
the appliance door
WARNING‒Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
1.
Slide in the intermediate pane. When doing so, en-
sure that the number on the intermediate pane is at
the bottom right .
2.
Slide the intermediate pane until it is in the left- and
right-hand retainers .
3.
Push the intermediate pane upwards until it is in the
retainer .
4.
Slide the inner pane in. In doing so, ensure that the
inner pane is in the retainer .
5.
Push the inner pane upwards until it is in the left-
and right-hand retainers .
6.
Put the door cover in position and push down on it
until you hear it click into place.