Installation Instruction
Table Of Contents
- Double oven
- en
- Table of contents
- 1 Safety
- 2 Preventing material damage
- 3 Environmental protection and saving energy
- 4 Familiarising yourself with your appliance
- 5 Accessories
- 6 Before using for the first time
- 7 Basic operation
- 8 Time-setting options
- 9 Childproof lock
- 10 Rapid heating
- 11 Cleaning and servicing
- 12 Cleaning assistance
- 13 Shelf supports
- 14 Appliance door
- 14.1 Detaching the lower appliance door
- 14.2 Attaching the lower appliance door
- 14.3 Removing the door panes from the lower the appliance door
- 14.4 Installing the door panes for the lower the appliance door
- 14.5 Detaching the upper appliance door
- 14.6 Attaching the upper appliance door
- 14.7 Removing the door panes from the upper the appliance door
- 14.8 Installing the door panes for the upper the appliance door
- 15 Troubleshooting
- 16 Disposal
- 17 Customer Service
- 18 How it works
- 19 Installation instructions
Installation instructions en
31
5.
Centre the appliance.
There must be an air gap of at least 5mm between
the appliance and adjacent unit fronts.
6.
Use a spirit level to adjust the appliance so that it is
perfectly level.
7.
Screw the appliance into place.
8.
For handleless kitchens with vertical bar handle
strips:
‒ Attach a suitable filling piece in order to cover
any sharp edges and to guarantee a safe install-
ation.
‒ Pre-drill aluminium profiles to establish a screw
connection .
‒ Secure the appliance using a suitable screw .
19.7 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Undo the fastening screws.
3.
Lift the appliance slightly and pull it out completely.