Installation Manual

48 en | On-Screen Display (OSD) Menus (Bosch Protocol) MIC612 Thermal Camera
F.01U.249.416 | 1.1 | 2012.03 Installation Manual Bosch Security Systems, Inc.
6.9 Diagnostics Menu
The Diagnostics menu contains a list of diagnostic tools and events. Most of these menu
items are display items only; you cannot select different values to change.
Diagnostic Events
Alarm Status
Enters the Alarm Status menu and displays the real time status of alarm inputs and outputs.
Alarm Inputs 1 to 8, Alarm Outputs 1 to 2 (Closed or Open)
BIST
Enters the Perform Built-in Self Tests menu. If confirmed, the BIST tests start and the results
are displayed.
YES to start test.
NO to exit the menu.
Typical results are:
Exit...
BIST
Data Flash: PASS
FPGA: PASS
Bilinx: PASS
Internal Temp.
Displays the current temperature of the camera, in degress Fahrenheit and in degrees Celsius.
High Temp Events
Displays the number of times that the threshold of high temperature was exceeded.
Highest Temp
Displays the highest temperature reached, in degrees Fahrenheit and in degress Celsius.
Diagnostics
Exit...
Alarm Status...
BIST...
Internal Temp: Deg F / Deg C
High Temp Events: Deg F / Deg C
Highest Temp Deg F / Deg C
Low Temp Events: Deg F / Deg C
Lowest Temp: Deg F / Deg C
Internal Humidity %
Humidity Events 0
Security Access: 0
CTFID Access: 0
Restart Events:
Power-up Events: 0
Low-Volt Events: 0
Video Loss Events: 0
Total Time On 0hr 0min
Thermal Camera Test Pattern On/Off
Focus / Iris: Save and Exit