Installation Manual

Überblick über die Installationsschritte
Befolgen Sie diese Anweisungen. der Reihe nach aus, um Ihre MIC-Kamera zu installieren.
Hinweis: Abhängig von Ihrem Kameramodell, der gewünschten Montageposition und -
ausrichtung sowie den Montagehalterungen und dem gewählten Kamerazubehör müssen Sie
möglicherweise nicht jeden Schritt ausführen.
Determine system
configuration.
Operate the camera.
(Refer to Section 16.)
Connect network cable
(Refer to Section 10.)
Install
illuminator.
Install
sunshield.
Configure settings.
(Refer to Section 13.)
Alarm/Washer
Interface Unit
VIDEOJET connect
PSU
Cant the camera.
(Refer to Section 11.)
Install cabling between power
source and camera mounting site.
Install MIC Camera.
(Refer to Section 9.)
Power supply source
or PoE device
Connect and configure
camera in box or
on table-top stand.
(Refer to Sections 5 & 6.)
Install optional accessories.
(Refer to individual installation manuals.)
Select mounting
location and
orientation.
(Refer to Section 7.)
Install mounting
accessories and
conduit (if applicable).
Identify required
mounting accessories.
(Refer to Section 8.)
Identify Mounting Site Requirements.
Install a
sunshield?
YES
YES
NO
NO
Will
camera
be canted?
Pre-
configure
camera?
NO
YES
YES
NO
Install
optional
camera
access-
ories?
3
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Überblick über die Installationsschritte | de
23
Bosch Security Systems Quick Installation Guide 2014.06 | 1.0 | F.01U.291.521