User Manual

MIC Series IP Power Supply Installation | en 13

Bosch Security Systems, Inc. User Manual F.01U.265.804 | 1.6 | 2012.08

3.2 Dimensions and Layout of MIC IP Power Supplies

The figures below display the dimensions and the layout of the enclosures of the MIC IP PSUs.

Figure 3.1 Layout of MIC IP PSU (Model numbers: MIC-IP-PS-115, MIC-IP-PS-230, MIC-IP-PS-24)

Figure 3.2 Layout of MIC IP IR PSU (Model numbers: MIC-IPIR-PS-115, MIC-IPIR-PS-230, MIC-IPIR-PS-24)

Number Description

1 Two (2) metal stand-offs for fiber optic module (module sold separately)

2 Transformer

3Encoder

4 Power board for encoder

5 Main PCB (Different configuration for IR and non-IR models)

6 Blanking plug over hole in enclosure for power cable

7 Cable gland for RJ45 / Fiber cable

8 Cable gland for optional washer drive

9 Cable gland for composite cable (analog connection)

10 For non-thermal cameras: Blanking plug over hole for optional cable gland for alarms

For thermal cameras: Blanking plug over hole for output for optional switch video

11 Hole for lid screw

12 Hole for mounting screw

13 Slot for SD card (card is user-supplied)

14 Thermal pads between encoder and inside of lid of enclosure

(13 in.)

330 mm

(7.87 in.)

200 mm

(9.84 in.)

250 mm

(12.2 in.)

310 mm