User Manual

34 en | Configuration using a Web browser MIC Series IP Power Supply
F.01U.265.804 | 1.6 | 2012.08 User Manual Bosch Security Systems, Inc.
4.6 Basic Mode: Encoder
Non-recording profile
You can select a profile for encoding the video signal.
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load).
Pre-programmed profiles are available, each giving priority to different perspectives. When
selecting a profile, details are displayed in the list field. Below is a brief description of the
factory default settings for the encoder profiles.
– High resolution 1
High quality for connections with the highest bandwidth, resolution 704 × 576/480 pixels
– High resolution 2
High quality for high bandwidth connections, resolution 704 × 576/480 pixels
– Low bandwidth
High resolution for low bandwidth connections, resolution 704 × 576/480 pixels
– DSL
For DSL connections with 500 kbps, resolution 704 × 576/480 pixels
– ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
– ISDN (1B)
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
– MODEM
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
– GSM
For GSM connections at 9,600 baud, resolution 352 × 288/240 pixels
NOTICE!
The names and the technical details for the encoder profiles depend on the configuration of
the device.