User Manual

48 en | Configuration using a Web browser MIC Series IP Power Supply
F.01U.265.804 | 1.6 | 2012.08 User Manual Bosch Security Systems, Inc.
3. Click the 1:1 Live View button below the preview screen to open a new window with the
original data stream and to check the image quality and the transmission rate.
Property
Select the required encoder properties for the relevant data stream here.
Non-recording profile
Select the required encoder profile here. The properties of the profiles are defined on the
Encoder Profile page (see Section 4.20 Encoder Profile, page 44).
JPEG stream
You can set up the separate JPEG stream in this area. These settings are independent of the
H.264 settings. The resolution corresponds to the highest setting from the two data streams.
Resolution
The video resolution. Options are: CIF, 4CIF/D1.
Max. frame rate
You can select the maximum frame rate for transmitting the JPEG images.
Picture quality
This setting allows you to define the picture quality. Low quality requires a lower bandwidth
in the network.
4.22 Pixel Counter
Counts the number of pixels in a defined image area. The pixel counter allows the installer
toeasily verify that the camera installation fulfills any regulatory or specific
customerrequirements, for example, calculating the pixel resolution of the face of a person
passing adoorway monitored by the camera.
4.23 Advanced Mode: Camera
4.24 Camera Options
Camera options are sorted into Settings Groups 1 through 4.
Settings Group 1 has the following settings:
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
– ATW: allows the camera to continuously adjust color reproduction.
– Indoor: white balance tracking for indoor use.
– Outdoor: white balance tracking for outdoor use.
– AWB Hold: places the ATW on hold and saves the color settings.
– Extended ATW (default): allows the camera to constantly adjust for optimal color
reproduction.
– Manual: Red and Blue gain can be manually set to a desired position.
– Outdoor Auto: Automatically adjusts the white balance to reduce the dark tones at dawn
or dusk.
– Sodium Lamp Auto: Automatically adjusts for sodium vapor light to restore objects to
their original color.
– Sodium Lamp: Optimizes the sodium vapor light to restore objects to their original color.