User Manual

MIC Series IP Power Supply Configuration using a Web browser | en 75
Bosch Security Systems, Inc. User Manual F.01U.265.804 | 1.6 | 2012.08
Status
The status of the DynDNS function is displayed here for information purposes. You cannot
change any of these settings.
4.44 Advanced
The settings on this page are used to implement advanced settings for the network.
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1. Make the desired changes.
2. Click the Set and Reboot button. The encoder is rebooted and the changed settings are
activated.