User Manual

86 en | Operation MIC Series IP Power Supply
F.01U.265.804 | 1.6 | 2012.08 User Manual Bosch Security Systems, Inc.
View Control
Control options for peripherals (for example a pan/tilt head or dome camera) depend on the
type of unit installed and on the configuration of the encoder.
If a controllable unit is configured and connected to the encoder , the controls for the
peripheral are displayed next to the video image.
1. To control a peripheral, click the appropriate controls.
2. Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
Digital I/O
The alarm icons Input 1 and Input 2 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's
configuration determines whether the alarm is displayed, as well as additional details (see
Section 4.15 LIVEPAGE Functions, page 41).
Triggering relay
You can switch connected units using the relays in the encoder (for example lights or door
openers). To activate this, click the icon for the corresponding relay next to the video image.
The icon will be red when the relay is activated.
System Log / Event Log
The System Log field contains information about the operating status of the encoder and the
connection. You can save these messages automatically in a file (see Section 4.15 LIVEPAGE
Functions, page 41).