Spec Sheet

3 Blanking plug for optional cable gland (M12) for:
- alarms (for non-thermal cameras)
- switched video output (for thermal cameras)
4 Cable gland (M12) for optional washer drive
Technical specifications
Electrical
Model Voltage / Power @ 50/60 Hz Applicable
Cameras
Non-IR IP Power Supply Units
MIC-IP-PS-24 Input: 24 VAC ± 10%
Consumption: 2.0 A
MIC550,
MIC612
MIC-IP-PS-115 Input: 115 VAC ± 10%
Consumption: 400 mA
MIC-IP-PS-230 Input: 230 VAC ± 10%
Consumption: 200 mA
IR IP Power Supply Units
MIC-IPIR-PS-24 Input: 24 VAC ± 10%
Consumption: 3.3 A
MIC550IR
MIC-IPIR-PS-115 Input: 115 VAC ± 10%
Consumption: 750 mA
MIC-IPIR-PS-230 Input: 230 VAC± 10%
Consumption: 350 mA
Mechanical
Dimensions (L x W x H) 330 mm x 250 mm x 90.75 mm
(13 in. x 9.84 in. 3.57x in.)
Form Factor
(four screw holes)
11.19 mm (0.44 in.)
Weight Non-IR PSUs: 7.21 kg (15.9 lb)
IR PSUs: 7.3 kg (16.1 lb)
Material Powder-coated cast aluminum, rated IP67
Color RAL 9010 (Pure White) with sand finish
Optional add-ons
(each sold separately)
MIC-ALM (8-input alarm card)
MIC-WKT (washer pump kit)
MIC-WKT-IR (washer pump kit with
integrated four-input alarm terminal for IR
models)
VG4‑SFPSCKT Fiber Optic Ethernet Media
Converter Kit
User Connections
Alarm Inputs/Outputs
- Non-IR, without expansion card Supports 1 tamper input.
- Non-IR, with expansion card Supports 8 inputs, 2 outputs.
- IR models Supports 4 inputs.
Environmental
Operating
Temperature
• Non-IR models: -40 °C to +60 °C
(-40 °F to +140 °F)
• IR models: -40 °C to +50 °C
(-40 °F to +122 °F)
Storage Temperature -40 °C to +65 °C (-40 °F to +149 °F)
Cold Start -30 °C
(Requires 30-minute warm-up period after
applying power before operation.)
Software Control
Camera Setup/
Control
Via Internet Explorer Web browser version 7.0 or
later or BVMS
Software
Update
Firmware upload
Network
Storage One (1) SD card slot (for an SD or an SDHC
card, user-supplied) with card capacity up to
32 GB
Standards H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming A total of four (4) independent streams:
• Two (2) individually configurable H.
264 streams at 4CIF/D1 resolution,
• One (1) H.264, I-frame only stream
(suitable for recording)
• One (1) M‑JPEG stream at 4CIF/D1
resolution
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms
Resolution (Horizontal x Vertical, PAL/NTSC)
- 4CIF/D1 704 x 576/480 (50/60 ips)
Depending on picture content and movement
- CIF 352 x 288/240 (50/60 ips
4
)
Ethernet 10-Base T/100 Base-TX, auto-sensing, half/
full duplex, RJ45
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP v3, RTSP, 802.1x, iSCSI,
DynDNS, UPnP, IP v4/6, QoS, SSH, SSL
Encryption TLS 1.0, SSL, AES (license option)
NTCIP Protocols
- CCTV Camera
Control
NTCIP 1205
- Application Layer SNMP per NTCIP 1101:1996 & NTCIP 2301
- Transport/Network
Layers
TCP/IP per NTCIP 2202:2001
- Sub-network Layer PMPP (Point to Multi-Point Protocol) per
NTCIP 2101:2001 & NTCIP 2102:2003
Audio 1 x 3.5mm stereo socket
- Standard G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
3 | MIC Series IP Power Supply