User Manual

MIC Series IP Power Supply Configuration using a Web browser | en 29
Bosch Security Systems, Inc. User Manual F.01U.265.804 | 1.6 | 2012.08
3. During initial installation, confirm the security questions that appear. The connection is
established and after a short time you will see the LIVEPAGE with the video image.
Maximum number of connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each encoder can have up to 25 Web
browser connections or up to 50 connections via Bosch Video Management System.
Protected Encoder
If the encoder is password protected against unauthorized access, the Web browser displays
a corresponding message and prompts you to enter the password when you attempt to
access protected areas.
1. Enter the user name and associated password in the corresponding text fields.
2. Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Protected network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the encoder must be configured accordingly, otherwise no communication is
possible.
To configure the unit, you must connect the encoder directly to a computer using a network
cable. This is because communication via the network is not enabled until the Identity and
Password parameters have been set and successfully authenticated (see
Section Authentication, page 76).
NOTICE!
The encoder offers the option to limit the extent of access using various authorization levels
(see Section 4.10 Password, page 37).