User Manual

MIC Series IP Power Supply Table of Contents | en 3
Bosch Security Systems, Inc. User Manual F.01U.265.804 | 1.6 | 2012.08
Table of Contents
1Safety 6
1.1 About this Manual 6
1.2 Conventions in this Manual 6
1.3 Legal Information 6
1.4 Important safety instructions/notices 7
2 Product Description 10
2.1 Overview of Functions 10
2.2 Summary of Functions 11
3 Installation 12
3.1 Parts List 12
3.1.1 User-Supplied Parts 12
3.1.2 User-Supplied Tools 12
3.2 Dimensions and Layout of MIC IP Power Supplies 13
3.3 MIC Power Supply Units (PSUs) for Non-IR MIC Cameras 14
3.4 MIC Power Supply Units (PSUs) for IR MIC Cameras 15
3.5 Earth Link on the PCB 15
3.6 Fuse Ratings 16
3.7 Installation Instructions 17
3.8 Commissioning the Camera with Heater Option Fitted 25
3.9 Simultaneous IP and Analog Video/Control ("Hybrid" Operation) 26
3.10 Assign an IP Address 26
3.11 Hardware connections between video servers 27
4 Configuration using a Web browser 28
4.1 Connecting 28
4.1.1 System Requirements 28
4.1.2 Additional Operational Requirements 28
4.1.3 Installing MPEG ActiveX 28
4.1.4 Establishing the Connection 28
4.2 Configuration menu 30
4.3 Basic Mode: Device Access 31
4.4 Basic Mode: Date/Time 32
4.5 Basic Mode: Network 33
4.6 Basic Mode: Encoder 34
4.7 Basic Mode: System Overview 35
4.8 Advanced Mode: General 36
4.9 Identification 36
4.10 Password 37
4.11 Date/Time 38
4.12 Display Stamping 39
4.13 Advanced Mode: Web Interface 40
4.14 Appearance 40
4.15 LIVEPAGE Functions 41
4.16 Logging 42