User Manual

12 en | Installation MIC Series IP Power Supply
F.01U.265.804 | 1.6 | 2012.08 User Manual Bosch Security Systems, Inc.
3 Installation
Each MIC power supply unit (PSU) provides all of the connections needed for power, video,
and telemetry for a single MIC camera. Each MIC PSU has CE and FCC approval and has an
aluminum enclosure that is weather-resistant (rated IP67). Features include:
– A built-in encoder for video and data transmission over an IP (standard 10/100 Base-T)
network
– A provision for driving various optional interface cards mounted internally to the MIC
power supply enclosure (for example, an 8-input alarm card (MIC-ALM))
– A provision for a signal interface card (MIC-BP4) to connect telemetry to Bosch Biphase
equipment
– Screw termination of all cables (composite, telemetry, and ancillary) into and out of the
enclosure
– Earth isolation and termination within the unit to control video earthing correctly and
thus prevent earth loops
The table below summarizes the MIC power supplies and their specifications:
3.1 Parts List
Each MIC IP PSU ships with the following parts:
– Two (2) M12 cable glands for telemetry and ancillary equipment
– One (1) M16 gland for connection of RJ45 or Fiber cable
– One (1) 1/2 in. NPT cable gland for connection of the shielded composite cable to the
MIC camera
– One (1) 1/2 in. NPT cable gland for the power cable connection
– One (1) 1/2 in. NPT and one (1) M12 blanking plug
3.1.1 User-Supplied Parts
Installers must provide the following parts to complete installation of a MIC PSU:
– Power cable in the appropriate length
– Four (4) M6 stainless steel screws and washers
– Metal conduit suitable for containing power cables external to the PSU enclosure
– Ethernet cable (terminated as needed)
3.1.2 User-Supplied Tools
– Ring crimp tool (Davico type DHCR15 or equivalent)
– Phillips-head screwdriver
MIC PSU Voltage Hz Power Output Applicable MIC Cameras
IP Power Supply Units (Non-IR)
MIC-IP-PS-115 115 VAC 50/60 Hz 40 VA 18 VAC
MIC550, MIC612
MIC-IP-PS-230 230 VAC 50/60 Hz 40 VA 18 VAC
MIC-IP-PS-24 24 VAC 50/60 Hz 40 VA 18 VAC
Dimensions
(H x W x D)
330 x 250 x 90.75 mm
13 x 9.8 x 3.6 in.)
Weight 7.21 kg (15.9 lb)
IP IR Power Supply Units
MIC-IPIR-PS-115 115 VAC 50/60 Hz 60 VA 18 VAC
MIC550IR
MIC-IPIR-PS-230 230 VAC 50/60 Hz 60 VA 18 VAC
MIC-IPIR-PS-24 24 VAC 50/60 Hz 60 VA 18 VAC
Dimensions
(H x W x D)
330 x 250 x 90.75 mm
(13 x 9.8 x 3.6 in.)
Weight 7.3 kg (16.09 lb)