User Manual

MIC Series IP Power Supply Configuration using a Web browser | en 31
Bosch Security Systems, Inc. User Manual F.01U.265.804 | 1.6 | 2012.08
Navigation
1. Click one of the menu items in the left window margin. The corresponding submenu is
displayed.
2. Click one of the entries in the submenu. The Web browser opens the corresponding
page.
Making changes
Each configuration screen shows the current settings. You can change the settings by entering
new values or by selecting a predefined value from a list field.
 After each change, click Set to save the change.
4.3 Basic Mode: Device Access
Camera name
You can give the encoder a name to make it easier to identify. The name makes the task of
administering multiple units in larger video monitoring systems easier, for example using the
Bosch Video Management System.
The camera name is used for the remote identification of a unit, in the event of an alarm for
example. For this reason, enter a name that makes it as easy as possible to quickly identify the
location.
Password
The encoder is generally protected by a password to prevent unauthorized access to the unit.
You can use different authorization levels to limit access.
CAUTION!
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the current field. Changes in any other fields
are ignored.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal management.