User Manual

36 en | Configuration using a Web browser MIC Series IP Power Supply
F.01U.265.804 | 1.6 | 2012.08 User Manual Bosch Security Systems, Inc.
4.8 Advanced Mode: General
4.9 Identification
Camera name
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so (see
Section Camera name stamping, page 39). The camera name makes the task of administering
cameras in larger video monitoring systems easier, for example using the Bosch Video
Management System.
Enter a unique, unambiguous name for the camera in this field Choose a name that makes it
as easy as possible to quickly identify the location. You can use both lines for this.
You can use the second line for entering additional characters; these can be selected from a
table.
1. Click the icon next to the second line. A new window with the character map is opened.
2. Click the required character. The character is inserted into the Result field.
3. In the character map, click the << and >> icons to move between the different pages of
the table, or select a page from the list field.
4. Click the < icon to the right of the Result field to delete the last character, or click the X
icon to delete all characters.
5. Now click the OK button to apply the selected characters to the second line of the
Camera 1 parameters. The window will close.
Camera ID
Each encoder should be assigned a unique identifier that you can enter here as an additional
means of identification.
Initiator extension
You can attach your own text to the initiator name of the encoder to make the unit easier to
identify in large iSCSI systems. This text is added to the initiator name, separated from it by a
full stop. You can see the initiator name in the system overview (see Section 4.7 Basic Mode:
System Overview, page 35).
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal management.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal management.