User Manual

64 en | Configuration using a Web browser MIC Series IP Power Supply
F.01U.265.804 | 1.6 | 2012.08 User Manual Bosch Security Systems, Inc.
3. Select the desired date from the calendar. You can select several consecutive calendar
days by holding down the mouse button. These will later be displayed as a single entry in
the table.
4. Click OK to accept the selection. The window will close.
5. Assign the individual holidays to the recording profiles, as described above.
Deleting holidays
You can delete holidays you have defined yourself at any time.
1. Click the Delete button. A new window will open.
2. Click the date you wish to delete.
3. Click OK. The item will be deleted from the table and the window will close.
4. The process must be repeated for deleting additional days.
Time periods
You can change the names of the recording profiles.
1. Click a profile and then the Rename button.
2. Enter your chosen name and then click the Rename button again.
Activating the recording
After completing configuration you must activate the recording scheduler and start the
recording. The configuration can be changed at any time.
1. Click Start to activate the recording scheduler.
2. Click Stop to deactivate the recording scheduler. Running recordings are interrupted.
Recording status
The graphic indicates the recording activity of the encoder. You will see an animated graphic
while recording is taking place.
4.36 Recording Status
Certain details on the recording status are displayed here for information purposes. You
cannot change any of these settings.