Spec Sheet

Video | MIC Mounting Brackets and Other Accessories
MIC Mounting Brackets and Other
Accessories
www.boschsecurity.com
u Full range of mounting brackets and other
accessories.
u Designed to integrate seamlessly with the MIC
family.
u Provides a best-fit solution for virtually any
application.
u Easy to use and install.
u Accessories extend functionality.
Bosch Security Systems offers a range of mounting
brackets and accessory products for the MIC family of
cameras. The mounting brackets (for corner, wall, and
pole mounting) are available in the standard colors of
the MIC family. (Note: Not all colors of mounting
brackets are available for all models of MIC cameras.)
The accessories have been designed to work
seamlessly with MIC cameras to extend their
functionality for your application. This datasheet
provides an overview of the available MIC accessories.
The following accessories have their own datasheets:
• MIC illuminators (for MIC IP camera models)
• MIC Alarm/Washer Interface (MIC-ALM-WAS-24)
• High PoE Midspan models
• VG4-A-PSU series
• VIDEOJET connect 7000 (VJC-7000-90)
The Serial Protocol Software License (MVS-FCOM-
PRCL), an e-license key for serial protocol for MIC IP
cameras, is also available.
System overview
Mounting Accessories
Deep Conduit Adapter
The MIC Deep Conduit Adapter (DCA) is designed to
allow a weatherproof conduit or cable gland to be
fitted to protect the signal cables. The DCA provides a
convenient mounting point for a MIC IP camera.
The hinge feature allows installers to “hang” the
camera temporarily but securely during installation for
easier connection of cables/wiring before final bolts
are installed.
The DCA has two M25 holes, one in the base and one
in the side.
An O-ring seals the camera-to-mount interface to an
ingress rating of IP68.
Supplied hardware includes:
• Four (4) M8 x 20 stainless steel hex bolts
• Four (4) M8 stainless steel plain washers
• One (1) O-ring, 80 mm x 3 mm
• One (1) end cap/blanking plug, M25 x 1.5, with O-ring
Certain models (MIC-DCA-HxA) also include:
• One (1) conduit adapter (male M25 to female 3/4"
NPT)