Use and Care Manual

-26-
Accessories
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heav i er the cord.
R
ECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
!
WARNING
T
ool’s
Ampere
Rating
C
ord Size in A.W.G.
W
ire Sizes in mm
2
3
-6
6-8
8
-10
10-12
12-16
18 16 16 14 0.75 0.75 1.5 2.5
18 16 14 12 0.75 1.0 2.5 4.0
1
8 16 14 12 0.75 1.0 2.5 4.0
1
6 16 14 12 1.0 2.5 4.0 —
14 12 —— ————
25 50 100 150 15 30 60 120
Cord Length in Feet
Cord Length in Meters
1/4” Collet Chuck *
1/2” Collet Chuck *
16 mm Shaft Wrench *
24 mm Collet Nut Wrench *
3/8” Collet Chuck **
8 mm Collet Chuck **
Deluxe Router Guide **
Centering Device **
Carry Case**
Dust Extraction Hoods **
Edge-Forming Dust Extraction Hood **
Fine Adjustment Control Extension **
Router Tables **
Router Bits **
Quick-Release Templet Guides **
Adapter for Threaded Templet Guides **
Adjustable Depth Stop Turret *
Templet Guide Adapter **
(*= standard equipment)
(**= optional accessories)
BM 2610004573 07-09:BM 2610004573 04-09 9/4/09 7:07 AM Page 26