Operation Manual

Encoder Settings
The encoder settings determine the characteristics of the four
streams generated by the camera. The type of streams that can
be generated are:
– HD streams
– SD streams
– i-frame only streams for recording
– M-JPEG streams
The bit rates, the encoding interval, and the Group-of-Pictures
(GoP) structure and quality, are defined and stored for 8
different profiles on the Encoder Profile page. The SD
(Standard Definition) resolution is also selected here.
The resolution of the two H.264 streams and the pre-defined
profile to be used for each stream is selected on the Encoder
Streams page. The maximum frame rate and quality of the JPEG
stream is also selected here.
The streams and profiles for recording are selected on the
Recording Profiles page.
The Encoder Regions page allows you to select different quality
levels for various areas of the image. This can help in reducing
the bit rate. For example, important objects can be selected to
provide higher quality encoding than selected background areas.
8
52 en | Encoder Settings
Camera Browser
Interface
2014.01 | v5.9 | AM18-Q0670 Bosch Security Systems