Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- Basic Mode
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Back Page
Recording
Images can be recorded to an appropriately configured iSCSI
system or, for cameras with an SD slot, locally to an SD card.
SD cards are the ideal solution for shorter storage times and
temporary recordings. They can be used for local alarm
recording or to improve the overall reliability of video recording.
For long-term authoritative images use an appropriately sized
iSCSI system.
Two recording tracks are available (Recording 1 and Recording
2). The encoder streams and profiles can be selected for each of
these tracks for both standard and alarm recordings.
Ten recording profiles are available where these recording
tracks can be defined differently. These profiles are then used
for building schedules.
A Video Recording Manager (VRM) can control all recording
when accessing an iSCSI system. The VRM is an external
program for configuring recording tasks for video servers. For
further information, contact your local customer service at
Bosch Security Systems.
Storage Management
Device manager
Check the Managed by VRM box to let an external Video
Recording Manager (VRM) manage all recording. No further
settings can be configured.
Note:
Activating or deactivating VRM causes the current storage
settings to be lost; they can only be restored through re-
configuration.
9
9.1
9.1.1
60 en | Recording
Camera Browser
Interface
2014.01 | v5.9 | AM18-Q0670 Bosch Security Systems