Manual

4 Click the camera icon to save a single image.
The storage location depends on the configuration of the
camera.
Recording video sequences
Sections of the video sequence that is currently being shown on
the LIVE page can be saved on the computer's hard drive. The
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1. Click the recording icon
to record video sequences.
– Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
2. Click the recording icon again to stop recording.
Play back saved video sequences using the Player from
Bosch Security Systems.
Full-screen display
Click the full-screen icon to view the selected stream in
full-screen mode; press any key on the keyboard to return to the
normal viewing window.
Audio communication
Audio can be sent and received via the LIVE page if the active
monitor and the remote station of the camera support audio.
1. Press and hold the F12 key on the keyboard to send an
audio signal to the camera.
2. Release the key to stop sending audio.
All connected users receive audio signals sent from the camera
but only the user who first pressed the F12 key can send audio
signals; others must wait for the first user to release the key.
3.1.7
3.1.8
3.1.9
Camera Browser
Interface
Operation via the browser | en 17
Bosch Security Systems 2014.07 | v1.592 | AM18-Q0678