Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- Basic Mode
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Back Page
Privacy Masks
Privacy masking is used to block a specific area of a scene from
being viewed. Four privacy mask areas can be defined. The
activated masked areas are filled with the selected pattern in
live view.
1. Select the pattern to be used for all masks.
2. Check the box of the mask you wish to activate.
3. Use the mouse to define the area for each of the masks.
7.8
Camera Browser
Interface
Camera | en 49
Bosch Security Systems 2014.07 | v1.592 | AM18-Q0678