Manual

Encoder Profile
Profiles are rather complex and include a number of parameters
that interact with one another, so it is generally best to use the
pre-defined profiles. Only change a profile if completely familiar
with all the configuration options.
Pre-defined profiles
Eight definable profiles are available. The pre-defined profiles
give priority to different parameters.
– Profile 1
High resolution for high bandwidth connections
– Profile 2
High resolution with lower data rate
– Profile 3
High resolution for low bandwidth connections
– Profile 4
Standard resolution for high bandwidth connections
– Profile 5
Standard resolution with lower data rate
– Profile 6
Standard resolution for low bandwidth connections
– Profile 7
Standard resolution for DSL connections
– Profile 8
Low resolution for mobile phone connections
Changing a profile
To change a profile, select it by clicking its tab and then change
the parameters within that profile.
If a setting outside the permitted range for a parameter is
entered, the nearest valid value is substituted when the settings
are saved.
Profile name
If required, enter a new name for the profile.
8.1
8.1.1
8.1.2
8.1.3
Camera Browser
Interface
Encoder Settings | en 53
Bosch Security Systems 2014.07 | v1.592 | AM18-Q0678