Manual

Encoder Streams
H.264 settings
Select H.264 Settings
1. Select a codec algorithm Property for stream 1 from the
drop-down box.
2. Select a codec algorithm Property for stream 2 (the
available choices depend on the algorithm selected for
stream 1).
3. Select the Non-recording profile for each stream from the
eight profiles that have been defined.
– This profile is not used for recording. When a stream is
used for recording, the profile selected on the
Recording Profiles page is used.
Preview >>
Previews of streams 1 and 2 can be shown.
1. Click Preview>> to display a preview of the video for
streams 1 and 2. The current profile is shown above the
preview.
2. Click 1:1 Live View below a preview to open a viewing
window for that stream. Various additional items of
information are shown across the top of the window.
3. Click Preview << to close the preview displays.
Note:
Deactivate the display of the video images if the performance of
the computer is adversely affected by the decoding of the data
stream.
Regions of Interest (ROI)
If you select an ROI property for stream 2, you can set up a
region of interest on the LIVE page.
8.2
8.2.1
Camera Browser
Interface
Encoder Settings | en 57
Bosch Security Systems 2014.07 | v1.592 | AM18-Q0678