Installation Manual

Auxiliary power
!
Caution!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
!
Caution!
Use only a +12 VDC power supply as an auxiliary power source.
The auxiliary power supply unit must be isolated from earth.
4 5 6 4 5 6
1 2 3 1 2 3
|
|
12VDC
- +
MENU
CVBS
µSD
E
T
H
-
P
o
E
D
A
T
A
A
L
A
R
M
5 mm
(0.2 in)
Connect an approved power supply unit with a rated supply
voltage of 12 VDC as follows:
1. Strip back 5 mm (0.2 in) of insulation on the power supply
cable (must be 16-22 AWG stranded wire or 16-26 AWG
solid wire).
2. Loosen the screws of the supplied 2-pole connector and
insert the stripped wires, then tighten the screws again.
3. Insert the 2-pole connector into the camera power socket.
6.2
DINION IP 8000 MP Connection | en 19
Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665