Installation Instructions

IP Camera 200 Series Installation | en 21
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
3.7 Mounting
Figure 3.6 Mounting the camera
To mount the camera to a wall or ceiling:
1. Stick the supplied installation paper sticker to the surface
taking care to orientate it correctly.
2. Drill two holes with a diameter of 6 mm.
3. Insert the supplied plugs into the holes.
4. Attach the camera and base unit securly to the surface
using the two supplied M4 screws.
M4 (Ø3.3 mm)
Ø 6 mm
x2
x2
CAUTION!
Do not point the camera/lens into direct sunlight as this may
damage the sensors.