Installation Manual
Table Of Contents
- Table of Contents
- 1 Safety
- 2 Introduction
- 3 System Information
- 3.1 Overview of functions
- 3.1.1 Progressive scan
- 3.1.2 Day/Night function
- 3.1.3 Quad-streaming
- 3.1.4 ONVIF (Open Network Video Interface Forum)
- 3.1.5 Audio
- 3.1.6 Alarm I/O
- 3.1.7 Tamper detection and motion detection
- 3.1.8 Video encoding
- 3.1.9 Multicast
- 3.1.10 Power-over-Ethernet
- 3.1.11 Data interface
- 3.1.12 Encryption
- 3.1.13 Recording
- 3.1.14 Configuration
- 3.2 Operation with external systems
- 3.1 Overview of functions
- 4 Planning
- 5 Installation
- 6 Camera configuration
- 7 Browser connection
- 8 Troubleshooting
- 9 Maintenance
- 10 Technical Data
FlexiDomeHD 1080p IP Camera Installation | en 31
Bosch Security Systems Installation Manual AM18-Q0601 | v1.0 | 2012.01
5.8 Camera positioning
The camera module position can be adjusted along three axes.
5.8.1 Pan
For horizontal adjustment (pan):
1. Slightly loosen the three screws in the fixing ring with the
supplied screwdriver bit.
2. Rotate the camera module in the base. Do not rotate more
than 180° in either direction.
3. Tighten the three screws in the fixing ring with the
supplied screwdriver bit.
CAUTION!
Do not expose the sensors to direct sunlight.