Installation Manual
Table Of Contents
- Table of Contents
- 1 Safety
- 2 Introduction
- 3 System Information
- 3.1 Overview of functions
- 3.1.1 Progressive scan
- 3.1.2 Day/Night function
- 3.1.3 Quad-streaming
- 3.1.4 ONVIF (Open Network Video Interface Forum)
- 3.1.5 Audio
- 3.1.6 Alarm I/O
- 3.1.7 Tamper detection and motion detection
- 3.1.8 Video encoding
- 3.1.9 Multicast
- 3.1.10 Power-over-Ethernet
- 3.1.11 Data interface
- 3.1.12 Encryption
- 3.1.13 Recording
- 3.1.14 Configuration
- 3.2 Operation with external systems
- 3.1 Overview of functions
- 4 Planning
- 5 Installation
- 6 Camera configuration
- 7 Browser connection
- 8 Troubleshooting
- 9 Maintenance
- 10 Technical Data
46 en | Technical Data FlexiDomeHD 1080p IP Camera
AM18-Q0601 | v1.0 | 2012.01 Installation Manual Bosch Security Systems
LAN interface STP, Ethernet 10/100 Base-T, auto-sensing,
half/full duplex, RJ45
Video encoding
protocols
H.264 (ISO/IEC 14496-10), M-JPEG
Image resolutions 1920 × 1080 pixels
Group of pictures IP, IBP, IBBP
Network protocols HTTP, HTTPs, SSL, TCP, UDP, ICMP,RTSP, RTP,
Telnet, IGMPv2/v3, SMTP,SNTP, FTP, DHCP client,
ARP, DNS,DDNS, NTP, SNMP, UPnP, 802.1X, iSCSI
Encryption TLS 1.0, SSL, AES (optional)
Alarm input Non-isolated closing contact
TTL logic, +5V nominal, +40 VDC max, DC coupled
with 22 kOhm pull-up to +3.3 VDC
Relay output Maximum voltage 30 VAC or +40 VDC.
Maximum 0.5 A continuous, 10 VA
Audio input 1 Vrms, impedance 12 kOhm
Audio output 1 Vrms, impedance 1.5 kOhm
Audio standards G.711, 8kHz sampling rate
L16, 16kHz sampling rate
Audio signal-to-noise
ratio
> 50 dB
Data port RS-232/422/485
Memory card slot Supports up to 1.2 TB microSD cards
Weight 2200 g (4.85 lb)
Environment IP66, NEMA Type 4X
Operating
temperature
-50 °C to +55 °C (-58 °F to +131 °F)
Operating
temperature (IVA)
-50 °C to +50 °C (-58 °F to +122 °F)