Installation Manual

12 en | Planning FLEXIDOME IP panoramic 6000/7000 - outdoor
2019-07 | V01 | DOC Installation manual Bosch Security Systems B.V.
Quantity Component
1 Conduit hole adapter rubber: for diameters less than M20 (1/2
in.)
1 Screw
1 Washer
2 Grommet (plus 1 spare)
1 Desiccant bag
Note: Do not open the bag before it is necessary to use its
content.
1 TR20 bit
1 Quick installation guide
1 Safety instructions
3 Identification label stickers
4.3 Preparation
Before installation, prepare and plan the installation process and materials needed.
Pre-requisites
– The components are removed from the box. Make sure that all parts are included and are
not damaged.
– The PoE cable is installed. Make sure that the PoE cable is less than 300mm (11.8 in.)
long from the point of installation of the device.
– The necessary material and equipment:
– To guarantee the IK10 standard, 4 screws M5 and mounting plugs M5 are necessary.
For installation with conduit, 5 screws M5 and mounting plugs M5 are necessary.
– Appropriate size power drill.
– Screwdriver and bit holder for TR20 bit.