Interactive User Manual

Table Of Contents
Familiarizing yourself with your appliance en-us
9
Familiarizing yourself with your appliance
4 Familiarizing yourself with your appliance
Familiarizing yourself with your appliance
This Use and Care Manual covers several models. Your model may have some but not all of the features listed.
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating
status.
The control panel image is representative. Your appliance may vary slightly.
Knob positions
You can use the control panel to configure all functions of
your appliance and to obtain information about the operat-
ing status.
Knob position Function
Off Cooking zone turned off
1 - 9 Power levels
NOTICE:
Always keep the control knobs clean and dry. Moisture
and dirt can affect proper functioning.
Cooking zone and residual heat indicators
When you turn on a cooking zone the indicator above On/
Off lights up. The indicators of the individual cooking
zones light up when a cooking zone is hot.
Indicator Meaning
On/Off
Cooktop is turned on
Cooking zone is turned on
Cooking zone is turned off and residual
heat is present
4.2 Cooking zones
Here you can find an overview of the cooking zones available on your cooktop. Place the cookware on the cooking zone
that best matches its size.
Refer to the overview of models and dimensions.
→Page2
Symbol Cooking zone Function
Single cooking zone Only one cooking zone size is available.
Dual cooking zone Two cooking zone sizes are available.
→
"Using the dual cooking zone", Page10
Note
The cooking zone regulates the temperature by switching
the heat on and off. The heat may also switch on and off
when on the highest power level.
¡ This protects components from overheating.
¡ The appliance is protected from electrical overload.
¡ Better cooking results are achieved.
Operation
5 Operation
Operation
Here you will find everything you need to know about op-
erating your appliance.
5.1 Setting the power level
Adjust the power level of the cooking zone with the control
knobs.
Push and turn the control knob to the desired power
level.
a The indicator above On/Off lights up.