FLEXIDOME IP panoramic 6000/7000 IC NFN-60122 | NFN-70122 en Installation Manual
FLEXIDOME IP panoramic 6000/7000 IC Table of Contents | en 3 Table of contents 1 Safety 5 1.1 Safety message explanation 5 1.2 Safety precautions 5 1.3 Important safety instructions 6 1.4 FCC and ICES compliance 7 1.5 Notices 8 2 Short information 3 System overview 10 3.1 Application variants 10 3.2 Using the camera 10 9 3.3 Operation with external systems 11 3.3.1 Larger surveillance systems 12 4 Planning information 13 4.1 Unpacking 13 4.2 Contents 13 4.
en | Table of Contents FLEXIDOME IP panoramic 6000/7000 IC 9 Maintenance 28 9.1 Cleaning 28 9.1.1 Lens cleaning 28 9.2 Repair 28 9.3 Reset 29 10 Decommissioning 30 10.1 Transfer 30 10.2 Disposal 30 11 Technical data 31 11.1 Specifications 31 11.2 Dimensions 37 2016.08 | v1.
FLEXIDOME IP panoramic 6000/7000 IC 1 Safety 1.1 Safety message explanation Safety | en 5 Caution! ! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Notice! Indicates a situation which, if not avoided, could result in damage to the equipment or environment, or data loss. 1.
1.3 FLEXIDOME IP panoramic 6000/7000 IC en | Safety Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings before operating the device. 1. Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. 2. Do not install device near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat. 3. Never spill liquid of any kind on the device. 4.
FLEXIDOME IP panoramic 6000/7000 IC 1.4 Safety | en 7 FCC and ICES compliance FCC & ICES Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1.5 en | Safety FLEXIDOME IP panoramic 6000/7000 IC Notices Notice! Optical elements are sensitive and should be protected at all times. Do not allow objects to come into contact with glass surfaces and do not touch optical elements with your fingers. Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information.
FLEXIDOME IP panoramic 6000/7000 IC 2 Short information | en 9 Short information This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was correct at the time of printing, however, the content can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between this manual and the product described.
3 en | System overview FLEXIDOME IP panoramic 6000/7000 IC System overview This discreet, aesthetic camera mounts flush in a ceiling or wall. Its easily-painted cover plate blends in with almost all surroundings. The 12MP sensor operating at 30 fps provides full panoramic surveillance with complete area coverage, fine details and high speeds. The camera offers full situational awareness and simultaneous E-PTZ views in high resolution.
FLEXIDOME IP panoramic 6000/7000 IC System overview | en 11 The camera recording and storage functions include local alarm recording and recording to iSCSI-based systems. The camera can also use the Bosch Video Recording Manager (VRM) to control recording and storage. Integration with the many Bosch recording solutions is seamless. 3.
en | System overview FLEXIDOME IP panoramic 6000/7000 IC Bosch Video Client The Bosch Video Client is a free Windows application to view, operate, control, and administer surveillance cameras and installations at remote locations. It offers a user-friendly interface for easy live viewing of multiple cameras, playback, forensic search and export. IP Helper The IP Helper tool is a free PC application that makes it easy to detect Bosch cameras and devices on your network. 3.3.
FLEXIDOME IP panoramic 6000/7000 IC 4 Planning information 4.1 Unpacking Planning information | en 13 This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all parts are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative.
4.3 en | Planning information FLEXIDOME IP panoramic 6000/7000 IC System requirements To enjoy the full benefits of megapixel resolutions, ensure that the computer, the graphic adapter, the display connections, and the monitor are sufficiently powerful to view our camera images at their best.
FLEXIDOME IP panoramic 6000/7000 IC 5 Installation 5.1 Local storage Installation | en 15 Notice! Local storage on memory cards should only be used for alarm recording. To minimize the risk of losing information, use multiple, redundant recording systems and a procedure to back up all digital information. To insert a memory card: 1. Slide the memory card into the slot. 2.
5.2 en | Installation FLEXIDOME IP panoramic 6000/7000 IC Painting the cover plate The paint for the cover plate must have the following specifications: – Epoxy or polyester based – Temperature range: -40°C to +80°C (-40°F to 176°F) To paint the cover plate: 1. Use a non-scratch scour pad to improve the adhesion of the paint. 2. Thoroughly clean the cover plate to remove dust particles. 3. Spray the paint in a dust-free environment. 2016.08 | v1.
FLEXIDOME IP panoramic 6000/7000 IC 5.3 Installation | en 17 Mounting the camera Notice! The 180° version of the camera, when mounted on a wall, must be horizontal along its east-west axis. To mount the camera on the surface of a wall or ceiling: 1. Cut out the inner recess hole: Ø159.2 mm (6.268 in). 2. Use the drilling template to mark out the four mounting holes. The mounting holes are equally spaced around a diameter of 175 mm (6.89 in). 3. Use a 6 mm (0.
en | Installation 5. FLEXIDOME IP panoramic 6000/7000 IC Insert the Ethernet cable into the RJ45 connector at the back of the camera. 6. Use the supplied screws and washers to securely mount the camera to the surface; if the surface is too thin, use appropriate bolts (not supplied). 2016.08 | v1.
FLEXIDOME IP panoramic 6000/7000 IC 7. Installation | en 19 To install the cover plate hold it against the camera body and rotate it clockwise until it clicks into place. Bosch Security Systems 2016.08 | v1.
5.4 en | Installation FLEXIDOME IP panoramic 6000/7000 IC Uninstalling the camera Remove the cover plate 1. Push a small object (for example, the 1.5 Allen key) into the opening (push straight, do not wobble). 2. Turn the cover plate counterclockwise to disconnect it from the camera body. 2016.08 | v1.
FLEXIDOME IP panoramic 6000/7000 IC Installation | en 21 Remove the camera 1. Unscrew the four screws and pull the camera away from the surface. 2. Disconnect the Ethernet cable and remove the camera. Bosch Security Systems 2016.08 | v1.
en | Connection 6 Connection 6.1 Network (and PoE power) FLEXIDOME IP panoramic 6000/7000 IC Connect the camera to a 10/100 Base-T network: – Use STP Category 5e cable with RJ45 connectors (the camera network socket is Auto MDIX compliant). – Power is supplied to the camera via the Ethernet cable compliant with the Power-over-Ethernet standard. Notice! Use only PoE approved devices. 2016.08 | v1.
FLEXIDOME IP panoramic 6000/7000 IC 7 Configuration 7.1 Browser connection Configuration | en 23 A computer with Microsoft Internet Explorer is used to receive live images, control the unit, and replay stored sequences. The unit is configured over the network using the browser. 7.1.1 Establishing the connection The unit must have a valid IP address to operate on your network and a compatible subnet mask. By default, DHCP is preset at the factory to On and so your DHCP server assigns an IP address.
en | Configuration 7.1.3 FLEXIDOME IP panoramic 6000/7000 IC Set-up with web browser 1. Open the camera in the web browser. 2. Click Configuration in the title bar. 3. Select Camera >> Installer Menu from the side bar. 4. Select the application variant before any other changes are made, as the camera reboots automatically and resets the factory defaults when the application variant is changed. 5. Select the installation parameters as required.
FLEXIDOME IP panoramic 6000/7000 IC Troubleshooting | en 8 Troubleshooting 8.1 Resolving problems 25 The following table is intended to help identify the causes of malfunctions and correct them where possible. Malfunction Possible causes Solution Unit does not Power failure. Check power supply. Faulty cable Check all cables, connections. plugs, contacts and operate. connections. No connection Incorrect unit Check all established, no configuration.
FLEXIDOME IP panoramic 6000/7000 IC en | Troubleshooting The unit does Alarm source is not Select possible alarm not report an selected. sources on the Alarm alarm. sources configuration page. No alarm response Specify the desired specified. alarm response on the Alarm connections configuration page; if necessary change the IP address.
FLEXIDOME IP panoramic 6000/7000 IC 8.2 Troubleshooting | en 27 Testing the network connection The ping command can be used to check the connection between two IP addresses. This allows testing whether a device is active in the network. 1. Open the DOS command prompt. 2. Type ping followed by the IP address of the device. If the device is found, the response appears as "Reply from ... ", followed by the number of bytes sent and the transmission time in milliseconds.
en | Maintenance 9 Maintenance 9.1 Cleaning FLEXIDOME IP panoramic 6000/7000 IC It is generally sufficient to use a dry cloth for cleaning, but a moist lint-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners. 9.1.1 Lens cleaning It is important to keep the lens clean to ensure optimum performance. Dust, grease, or fingerprints should be removed from the lens surface.
FLEXIDOME IP panoramic 6000/7000 IC 9.3 Maintenance | en 29 Reset Use the factory reset button to restore the unit to its original settings. Any changes to the settings are overwritten by the factory defaults. A reset may be necessary, for example, if the unit has invalid settings that prevent it from functioning as desired. Bosch Security Systems 2016.08 | v1.
en | Decommissioning 10 Decommissioning 10.1 Transfer FLEXIDOME IP panoramic 6000/7000 IC The unit should only be passed on together with this installation guide. 10.2 Disposal Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material.
FLEXIDOME IP panoramic 6000/7000 IC Technical data | en 11 Technical data 11.1 Specifications 31 Power Power Supply Power-over-Ethernet 48 VDC nominal Power 140 mA Consumption 200 mA (Intelligent Video Analytics version) PoE IEEE 802.3af (802.3at Type 1) Sensor Type 1/2.3‑inch CMOS Total sensor pixels 12MP Used pixels (180° 3648 x 2160 (8MP) version) Used pixels (360° 2640 x 2640 (7MP) version) Video performance – Sensitivity – 360° lens (3100K, reflectivity 89%, F2.
FLEXIDOME IP panoramic 6000/7000 IC en | Technical data Video performance – Dynamic range Dynamic range 92 dB WDR (+16 dB IAE) Video streaming Video compression H.264 (MP); M- JPEG Streaming Multiple configurable streams in H.264 and M-JPEG, configurable frame rate and bandwidth. Multiple channels with edge dewarping. Regions of Interest (ROI) Overall IP Delay Min. 120 ms, Max.
FLEXIDOME IP panoramic 6000/7000 IC Technical data | en 33 Video resolution (H x V) – 360° version Video 3 channel Double panoramic 1920 x 1080 Corridor 1600 x 1200 E-PTZ 1280 x 720 Video functions Day/Night Color, Monochrome, Auto (adjustable switchover points) Adjustable picture Contrast, Saturation, Brightness settings White Balance 2500 to 10000K, 4 automatic modes (Basic, Standard, Sodium vapor, Dominant color), Manual mode and Hold mode Shutter Automatic Electronic Shutter (AES) Fixe
FLEXIDOME IP panoramic 6000/7000 IC en | Technical data Video functions Exposure region Multiple selectable regions Privacy Masking Eight independent areas, fully programmable Video Content MOTION+ and Intelligent Video Analytics Analysis Pre-positions Six independent sectors Display stamping Individual names and stamps for all video channels Other functions Pixel counter, Video watermarking, Location Optical Lens (180° version) 2.1 mm fixed-focus lens (IR corrected), F2.
FLEXIDOME IP panoramic 6000/7000 IC Technical data | en 35 Local storage Internal RAM 10 s pre-alarm recording Memory card slot Supports up to 32 GB microSDHC / 2 TB microSDXC card. (An SD card of Class 6 or higher is recommended for HD recording) Recording Continuous recording, ring recording.
FLEXIDOME IP panoramic 6000/7000 IC en | Technical data Network Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication Encryption TLS 1.
FLEXIDOME IP panoramic 6000/7000 IC Technical data | en 37 Environmental 11.2 Storage humidity up to 98% RH Vandal resistance IK06 (Lens: IK04) Dimensions 68.2 (2.7) 7.2 (0.28) 58.8 (2.3) Ø 159.2 (6.3) Ø 194.6 (7.7) mm (in) Bosch Security Systems 2016.08 | v1.
Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V.
