LP Conversion Kit Installation Guide
8
NGMP656UC
NGMP056UC
NGM5655UC, NGM8656UC, NGM8646UC
4.
Insert each of the LP gas orifices provided with this kit
into the socket (using the small piece of foam tape to
assure a tight fit).
Note: The NGMP056UC and NGMP656UC models
have two orifices. The larger orifice should be installed
in the center port and the smaller orifice should be
installed in the port to the side.
A Check to be sure the small piece of foam tape
used earlier is fitted to wrap against one side
of the socket.
B When pressing the socket driver onto the ori-
fice, the tape will help the orifice fit more
snugly inside the socket. This will help prevent
the orifice from falling out of the socket during
insertion.
$
%