Design Guide

1–800–944–2904 | bosch-home.com/us
500 / 800 Series 30" Single Wall Ovens
Installed in combination with other products.
SideOpening Door Models: If another product is installed adjacent to
the side hinge we recommend to increase each distance by an additional
1
/
4
" (6mm) to leave room for the door to open and close freely.
Standard Flush
Cutout 1
The ovens will overlap the cutout resulting in
a
1
/2" (13mm) spacing between the products
IMPORTANT: The spacing between cutouts applies when installing any Bosch 30" or
27" single, double, combination and 27"/30" compact oven in a side-by-side installation.
Side-by-Side Installation
Cutout 2 Cutout 1 Cutout 2
Standard Flush
Cutout 1
The ovens will overlap the cutout resulting in
a
1
/2" (13mm) spacing between the products
IMPORTANT: The spacing between cutouts applies when installing any Bosch 30
" or
27
" single, double, combination and 27"/30" compact oven in a side-by-side installation.
Side-by-Side Installation
Cutout 2 Cutout 1 Cutout 2
NOTE: This configuration is available as a combo oven (one cut out, one
electrical hook up) – HBL57M52UC (500 series), HBL8752UC (800 series)
and HBL87M52UC (800 series)
Standard Installation
30" Speed Oven or Microwave over Single Oven***
Standard Installation
30" Single Oven over Storage or Warming Drawer
Flush Installation
Speed Oven or Microwave over 30" Single Oven**
Flush Installation
Single Oven over Storage or Warming Drawer
Standard Installation
27" Single Oven over Warming Drawer
Standard Installation
27" Speed Oven or Microwave over Single Oven
Flush Installation
Single Oven over Warming Drawer
Flush Installation
Speed Oven or Microwave over 27" Single Oven
Standard Installation
27" Single Oven over Warming Drawer
Wall oven junction box may be located
above or right or left of the unit within
reach of the power conduit.
Electrical hook up may be located below
(depending on space) or next to the drawer
within the reach of the power cord.
Warming Drawer
required
minimum
IMPORTANT: base has to be able to support
oven weight. Please check oven manual for
minimum weight requirements.
Flush Installation
Single Oven over Warming Drawer
between cutouts*
Built-in Wall Ovens — 500 / 800 Series Wall Oven Design Combinations
500 / 800 Series Wall Oven Design Combinations | Built-in Wall Ovens | 7574 | Built-in Wall Ovens | 500 / 800 Series Wall Oven Design Combinations
500 / 800 Series Wall Ovens (All Models)
Side-by-Side Installation.
500 / 800 Series 27" Single Wall Ovens
Installed in combination with other products.
NOTE: Horizontal installation of a 27" oven
next to a 27" speed oven with warming
drawer is possible, but the speed oven and
warming drawer require either two cutouts or
one cutout with a shelf support in between.
Warming Drawer
required
minimum
IMPORTANT: base has to be able to support
oven weight. Please check oven manual for
minimum weight requirements.
Flush Installation
Single Oven over Storage or Warming Drawer
between cutouts*
Standard Installation
30" Single Oven over Storage or Warming Drawer
Wall oven junction box may be located above
or right or left of the unit within reach of the
power conduit.
Electrical hook up may be located below
(depending on space) or next to the drawer
within the reach of the power cord.
NOTE: This configuration available as a combo oven.
See Note at left for details.