Use and Care Manual

9000989325 Rev A English 11
Placing Burner Caps
Each cap has a letter (A, C, D, or F) cast in the underside
of the cap that corresponds to a letter (A, C, D, or F) cast in
the burner base that is attached to the appliance.
• Place each burner cap on its correct burner base per
its corresponding letter designation. See Figure 5
“Burners Caps” on page 11.
• Place burner cap gently on top of base so that the
prongs of the burner base fit snugly into the groove of
the burner cap.
Checking Burner Cap Placement
• Check to make sure there is not a gap between the
burner cap and burner base. See Figure 7 “Burner Cap
Placement” on page 12 to see the correct and incorrect
placements of the burner cap.
• You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Figure 6: Burners Caps
Burner Base
Burner Cap
Matching letter
designation.