Manual

Operation via the browser
Live page
After the connection is established, the LIVE page is initially
displayed. It shows the live video image on the right of the
browser window. Depending on the configuration, various text
overlays may be visible on the live video image.
Other information may also be shown next to the live video
image. The items shown depend on the settings on the LIVE
Functions page.
Video input
If the application variant is set to Dewarp, you can select one of
the three available video channels for viewing:
1. On the left side of the browser, expand the Connection
group if necessary.
2. Click the Video Input to see the options.
– By default these are named Full Image Circle (video
1), Dewarped view mode (video 2), and E-PTZ (video
3). These names can be changed in the Configuration
>> General >> Identification menu.
3. Select the video channel you wish to view.
Dewarping
To view a circular or dewarped live view image:
1. On the left side of the browser, expand the Connection
group if necessary.
2. Click the Dewarping arrow to see the options.
3. Select E-PTZ or Off.
Image selection
To view a live stream:
1. On the left side of the browser, expand the Connection
group if necessary.
3
3.1
3.1.1
3.1.2
3.1.3
Camera Browser
Interface
Operation via the browser | en 15
Bosch Security Systems 2015.06 | v1.610 | AM18-Q0690