Manual

LIVE Functions
You can adapt the LIVE page functions to meet your
requirements. Choose from a variety of different options for
displaying information and controls.
1. Select the check boxes for the functions to be displayed on
the LIVE. The selected elements are checked.
2. Check to see if the desired items are shown.
Transmit audio
When selected, the audio from the camera (if set to On on the
Audio page) is sent to the computer. This setting applies only to
the computer on which the selection is made. Transmitting
audio data requires additional network bandwidth.
Lease time [s]
The lease time in seconds determines the time beyond which a
different user is authorized to control the camera after no
further control signals are received from the current user. After
this time interval, the camera is automatically available for
another user.
Allow snapshots
Select the type of player to be used for live mode viewing.
Allow local recording
Specify whether the icon for saving video sequences locally
should be displayed below the live image. Video sequences can
only be saved locally on your hard disk if this icon is visible.
I-frames-only stream
Select to display an additional tab on the LIVE page where only
I-frames can be viewed. Ensure that I-frame quality is not set to
Auto or no updates will occur.
5.2
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
32 en | Web Interface
Camera Browser
Interface
2015.06 | v1.610 | AM18-Q0690 Bosch Security Systems