Manual

Note:
SD card recording performance is highly dependent on the
speed (class) and performance of the SD card. An SD card of
Class 6 or higher is recommended.
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the
Managed storage media list, activated, and configured for
storage.
Note:
A iSCSI target storage device can only be associated with one
user. If a target is being used by another user, ensure that the
current user no longer needs the target before decoupling that
user.
1. In the Storage overview section, double-click a storage
medium, an iSCSI LUN or one of the other available drives.
– The medium is added as a target in the Managed
storage media list.
– Newly added media is shown as Not active in the
Status column.
2. Click Set to activate all media in the Managed storage
media list.
– The Status column shows all media as Online.
3. Check the box in the Rec. 1 or Rec. 2 column to specify the
recording tracks to be recorded on the target selected.
Formatting storage media
All recordings on a storage medium can be deleted at any time.
Check the recordings before deleting and back-up important
sequences on the computer's hard drive.
1. Click a storage medium in the Managed storage media list
to select it.
2. Click Edit below the list.
3. Click Format in the new window to delete all recordings in
the storage medium.
8.2.3
8.2.4
58 en | Recording
Camera Browser
Interface
2015.06 | v1.610 | AM18-Q0690 Bosch Security Systems