Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
3. During initial installation, confirm any security questions
that appear.
Note:
If you cannot connect, the unit may have reached its maximum
number of connections. Depending on the device and network
configuration, each unit can have up to 50 web browser
connections, or up to 100 connections via Bosch Video Client or
Bosch Video Management System.
Password protection in camera
A unit offers the option of limiting access across various
authorization levels. If the unit is password-protected, a
message to enter the password appears.
1. Enter the user name and the associated password in the
appropriate fields.
2. Click OK. If the password is correct, the desired page is
displayed.
Protected network
If a RADIUS server is used for network access control (802.1x
authentication), the unit must be configured first. To configure
the unit, connect it directly to a computer using a network cable
and configure the two parameters, Identity and Password. Only
after these have been configured can communication with the
unit via the network occur.
1.2.1
1.3
12 en | Browser connection
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems