Operation Manual

The alarm symbol is for information and indicates the status of
an alarm input:
– The symbol lights when the input alarm is active.
The alarm output allows the operation of an external device (for
example, a light or a door opener).
– To activate the output, click the checkmark symbol.
– The symbol lights when the output is activated.
Recording status
The hard drive icon below the live camera image changes
during an automatic recording. The icon lights up and displays a
moving graphic to indicate a running recording. If no recording
is taking place, a static icon is displayed.
Saving snapshots
Individual images from the displayed live video stream can be
saved locally in JPEG format on the computer's hard drive.
– Click the photo camera icon to save a single image.
– The storage location depends on the configuration of
the camera.
Recording live video
Video sequences from the displayed live video stream can be
saved locally on the computer's hard drive. The sequences are
recorded at the resolution specified in the encoder
configuration. The storage location depends on the
configuration of the camera.
1. Click the recording icon
to record video sequences.
– Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
2. Click the recording icon again to stop recording.
3.1.4
3.1.5
3.1.6
16 en | Operation via the browser
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems