Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Alarm flag
Indicates that an alarm has occurred.
Communication error
A communication error, such as a connection failure to the
storage medium, a protocol violation or a timeout, is indicated
by this icon.
Gap
Indicates a gap in the recorded video.
Watermark valid
The watermark set on the media item is valid. The color of the
check mark changes according to the video authentication
method that has been selected.
Watermark invalid
Indicates that the watermark is not valid.
Motion alarm
Indicates that a motion alarm has occurred.
Storage discovery
Indicates that recorded video is being retrieved.
Audio communication
Audio can be sent and received via the Live page if the unit and
the computer support audio.
1. Press and hold the F12 key on the keyboard to send an
audio signal to the unit.
2. Release the key to stop sending audio.
3.1.10
18 en | Operation via the browser
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems