Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
General settings
Identification
Naming
Assign a unique name to assist in identification. This name
simplifies the management of multiple devices in more extensive
systems.
The name is used for remote identification, for example, in the
event of an alarm. Choose a name that makes it as easy as
possible to identify the location unambiguously.
ID
Each device should be assigned a unique identifier that can be
entered here as an additional means of identification.
iSCSI Initiator extension
Add text to an initiator name to make identification easier in
large iSCSI systems. This text is added to the initiator name,
separated from it by a full stop. (You can see the initiator name
in the System Overview page.)
4
4.1
4.1.1
4.1.2
4.1.3
Camera Browser
Interface
General settings | en 23
Bosch Security Systems 2016.09 | v1.632 | AM18-Q0718