Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Display Stamping
Various overlays or stamps in the video image provide important
supplementary information. These overlays can be enabled
individually and arranged on the image in a clear manner.
Camera name stamping
Select the position of the camera name overlay in the drop-
down box. It can be displayed at the Top, at the Bottom, or at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
Logo stamping
To place a logo on the image, select and upload an
uncompressed .bmp file with a maximum size of 128x128 pixels
and 256 colors to the camera. Its position on the image can then
be selected.
Time stamping
Select the position of the time and date overlay in the drop-
down box. It can be displayed at the Top, at the Bottom, or at a
position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y
position fields.
Display milliseconds
If necessary, display milliseconds for Time stamping. This
information can be useful for recorded video images; however, it
does increase the processor's computing time. Select Off if
displaying milliseconds is not needed.
4.4
4.4.1
4.4.2
4.4.3
4.4.4
28 en | General settings
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems