Operation Manual

Camera
Installer Menu
Application variant
(only present on some cameras)
The camera has a choice of application variants that set up the
camera for optimum performance in a specific environment.
Select the application variant best suited to your installation.
The application variant must be selected before any other
changes are made, as the camera reboots automatically and
resets the factory defaults when the application variant is
changed.
Base frame rate
Select the base frame rate for the camera.
Note:
Shutter times and frame rates, and the analog output (if
present) are affected by this value.
Camera LED
(only present on some cameras)
Disable the Camera LED on the camera to switch it off.
Rotate image
The integrated gyro/accelerometer sensor detects the optimal
image orientation and allows the user to select it by clicking Use
proposed rotation.
Select the required angle (0°, 90°, 180° or 270°) to output the
correct image orientation.
Mirror image
(only present on some cameras)
Select On to output a mirror image of the camera picture.
6
6.1
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
Camera Browser
Interface
Camera | en 35
Bosch Security Systems 2016.09 | v1.632 | AM18-Q0718