Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Menu button
Select Disabled to prevent access to the install wizard via the
menu button on the camera itself.
Analog output
Select an aspect ratio format to activate the analog output of
the camera.
Reboot device
Click Reboot to restart the camera.
Factory defaults
Click Defaults to restore the factory defaults for the camera. A
confirmation screen appears. Allow several seconds for the
camera to optimize the picture after a reset.
Lens Wizard
Click Lens Wizard... to open a separate window which can be
used to focus the camera lens (not for all cameras).
Positioning
The coordinate system allows you to enter the parameters that
define the location of the camera.
For some panoramic cameras you can also select the mounting
position (for example, wall, ceiling or custom).
6.1.6
6.1.7
6.1.8
6.1.9
6.1.10
6.1.11
36 en | Camera
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems