Operation Manual

Lens Wizard
This page enables you to focus the lens on a particular area.
In the preview window, use the mouse to change the size and
position of the shaded box that defines the focus area. (Check
the box below the preview window to show only the defined
area in the main window.)
Center
(only for cameras with motorized focus adjustment)
Click Center to set back focus to center position.
Zoom
(only for AVF lenses)
Use the slider to adjust the optical zoom of the lens.
Focus
(only for cameras with motorized focus adjustment)
1. Check the IR-corrected lens box to have the same focus
positions for day and night.
– To adjust the focus position separately for day and
night uncheck the IR-corrected lens box. Select the
Day/night mode (Color or Monochrome) in the
Configuration / Camera / ALC menu; the relevant focus
position slider is activated.
2. The lens type is displayed; if applicable, select the lens
type.
3. To autofocus the lens click either Full Range or Local
Range:
– The motorized automatic back focus process runs
through either the full range or the local range.
– The focus position, state and indicator are shown.
4. If the IR-corrected lens box is unchecked, select the other
Day/night mode and readjust the focus for this mode.
6.2
Camera Browser
Interface
Camera | en 37
Bosch Security Systems 2016.09 | v1.632 | AM18-Q0718