Operation Manual
Table Of Contents
- Title Page
- Table of Contents
- Browser connection
- System overview
- Operation via the browser
- General settings
- Web Interface
- Camera
- Encoder Settings
- Recording
- Alarm
- Setting up VCA
- Interfaces
- Network
- Service
- Appendices
- Back Page
Picture settings – Scene mode
A scene mode is a collection of image parameters that are set in
the camera when that particular mode is selected (installer
menu settings are excluded). Several pre-defined modes are
available for typical scenarios. After a mode has been selected,
additional changes can be made through the user interface.
Current mode
Select the mode you wish to use from the drop-down menu.
Mode ID
The name of the selected mode is displayed.
Copy mode to
Select the mode from the drop-down menu to which you wish to
copy the active mode.
Restore Mode Defaults
Click Restore Mode Defaults to restore the factory default
modes. Confirm you decision.
Scene mode factory defaults
Indoor
This mode is similar to the outdoor mode but it avoids the
limitations imposed by the sun or street lighting.
Outdoor
This mode covers most situations. It should be used in
applications where the lighting changes from day to night. It
takes into account sun highlights and street (sodium vapor)
lighting.
6.3
6.3.1
6.3.2
6.3.3
6.3.4
6.3.5
38 en | Camera
Camera Browser
Interface
2016.09 | v1.632 | AM18-Q0718 Bosch Security Systems